CONTACT INFO
912-237-2418  Ph

First Frontier Inc
169 Carl Dasher Road
Glennville, GA 30427

Slab Saws



TC-10 saw saw  w/o blade

 

This saw makes it easy to trim and slab small rocks The TC-10 TRIM/SLAB SAW comes with 1/3 HP 110V 60 Hz motor, power feed, vise, and see-through hood. (Blade not included. Choice of blade depends on your application.) Slabbing rocks is easy using the power feed mechanism. Secure your rock in the large vise - it takes rocks up to 3 5'8" x 6" wide by 6" long - and the power feed goes from there. Vise glides smoothly and accurately on two stainless steel rails. Vise cross feed is 2". Power feed has automatic shutoff switch. Trimming slabs is also easy. Arbor is centered on 13" x 17" table, making a 90 degree perpendicular cut every time. Stainless steel arbor shaft has two sealed ball bearings and an extra neoprene seal at tank. Hinged table flips up for access to coolant tank, making clean up easy! Tank is durable aluminum construction with impact resistant finish for long life. Takes approx. one gallon oil as coolant.

$1540.00   
 

********************************************

Diamond Pacific 10TSB slab saw
The 10TS-B Trim/Slab Saw comes with vise, splash guard and 1/3 HP 110V 60 Hz motor. (Blade not included so that you can choose the blade best suited for your cutting application.) 1) it has all the features needed to make it a versatile trim and slab saw. Easy to use as a trim saw because the vise rotates off to one side to free the table for trimming. With the vise in place, you can slab rocks up to 3 1/2 " in diameter. Table measures 12" W x 17" L. Overall size approx. 26 " x 15" W. 2) it's built solid and rugged with cast aluminum construction with a durable, impact-resistant finish. Arbor shaft is 5/8" stainless steel with lubricated, factory sealed ball bearings, and an extra neoprene oil seal on the tank side. The 10TS-B should be used with oil as a coolant, taking 8 oz. coolant for initial fill. Vise is steel plate with hardwood facings. Designed for a longevity, economical gravity feed system, the vise has 1 1/2" lateral movement for cross-feeding and adjustable stop guide for constant thickness cuts.
$1260.00   

****************************************************************

TR18 and TR 24 slab saw
Power-glide hydraulic system
V-Guide rail system
Multi-stage Filter and recirculation
Heavy duty tank
1" arbor shaft
cross feed is 6.5" on 18" and 8" on 24" saw
NOTE: SAWS WIRED FOR 110V REQUIRE a 20 amp CIRCUIT and a NEMA 5-20
Crating fee for 18" is $252.00 and $ 289.00 for 24" saws $ 600 for 36" saw
     SHIPPING IS FREIGHT COLLECT. ONLY crating charge added at time of order. BLADE  NOT   INCLUDED
6-8 week build time from paid order--  CALL TO ORDER AND FOR PRICING